Menu Groups | Options

  • User advanced menu: This is a legacy option that has no effect.

  • Installer menu group: This option can be enabled for menu groups used by site installers and technicians. When a user with this menu group logs into the keypad the Installer Logged In trouble input is opened.

    In addition, users with this menu group assigned can stay logged in to the keypad indefinitely, regardless of the Time user is logged in setting in Expanders | Keypads | Configuration. This is convenient for installers who will be commissioning and maintaining the site.

  • Show user greeting: Enable this option for the keypad to display a personal greeting to the user when they log in. For example, when the user John Smith logs in to the keypad at 9am it will display the message, 'Good Morning John Smith'. This option may be disabled to decrease the time it takes to log in to a keypad.

    This option is equivalent to the Show a greeting message to user option in Users | Users | Options. The greeting will be displayed if either option is enabled for the user.

  • User can acknowledge alarm memory: When this option is enabled, users with this menu group assigned are able to acknowledge alarms in the alarm memory. Users can access the alarm memory by pressing [MENU] [5] [1]. The user must also have access to the View menu (General tab).

    When this option is disabled, users can view alarms but cannot acknowledge them.

    This option is equivalent to the User can acknowledge alarm memory option in Users | Users | Options. Alarms can be acknowledged if either option is enabled for the user.

  • Show user alarm memory on logon: When this option is enabled the keypad will automatically display the alarm memory for the keypad's primary area to the user when they log in to the keypad. The user must also have access to the View menu (General tab).

    This option is equivalent to the Show alarm memory on login option in Users | Users | Options. The alarm memory will be shown if either option is enabled for the user. The keypad's primary area can be set as the Area this LCD belongs to (Expanders | Keypads | Configuration).